Stuck & Noisy Lead Screw? Resin Contamination in Resin 3D Printers
Solve Stuck Lead Screw, Z-axis Noise & Resin Contamination for Resin 3D Printers
For LCD, DLP and SLA resin 3D printing, most users focus on resin, release film and exposure accuracy, ignoring Z-axis lead screw and linear rail. The lubrication condition directly decides layer uniformity, print precision and machine noise.
Equipment manufacturers and print shops face common maintenance headaches:
Ordinary grease solidifies in cold workshop, or leaks under continuous high temperature
Lead screw sticks and makes loud noise during Z-axis movement
Conventional grease migrates and contaminates resin, ruining dental & medical printed models
Frequent disassembly & regreasing causes downtime and high labor cost
BX-300/F(8)-JR-WY high temperature food grade lubricating grease is custom-made for 3D printer lead screw & rail maintenance, a reliable alternative to Molykote EM30L.
Core Benefits
Wide Temperature Stability: -30℃ ~120℃Semi-synthetic base oil + clay thickener system. No hardening at low temperature, no dripping under high temperature. Avoid layer shift and print failure in 24h continuous mass production.
Anti-Wear & Noise ReductionStrong adhesion to form dense protective oil film. 4-ball load up to 250KG. Lower friction, eliminate Z-axis noise, reduce motor load and extend lead screw service life.
NSF H1 Food Grade, No Resin ContaminationCertified NSF H1, meets FDA, RoHS, REACH requirements. Low migration, non-toxic. Safe for dental, medical and food mold 3D printing. Biocompatibility report available on request.
Long-Lubrication & Dust ResistanceNLGI 2.5 consistency. Resist resin dust washout. Longer maintenance cycle, cut downtime & labor cost.
Application Range
Desktop LCD resin 3D printers
Industrial DLP mass production printers
Dental / medical / food mold 3D printers
SLA jewelry & miniature printers
Composite drive: metal lead screw + plastic slider, compatible with POM, PA, no corrosion
Our Support
Baoxing Lubricant has 20 years experience in specialty lubricants.
✅ Free samples for on-machine test
✅ Engineer support for lubrication standard operation
✅ Multiple packing: small tube for OEM assembly, drum for factory maintenance
Our grease is adopted by leading 3D printer brands including Creality, Fastform etc., for new machine pre-lubrication and after-sales maintenance.
FAQ
Q1: Can this grease fix stuck & noisy lead screw?
A: Stuck and noise usually come from dried grease, temperature degradation and poor wear resistance. Clean old grease & dust, then apply BX grease, the Z-axis will run smoothly with noise eliminated.
Q2: Will it corrode plastic sliders?
A: Chemically stable, safe for POM, PA and common engineering plastics. Pass copper corrosion test. For special modified plastics, material compatibility test is available before mass order.
