Dec. 03, 2020
What factors should be considered when choosing lubricants for plastic gears?
First, we need to clarify the material of the plastic gear. The common ones are PC/ABS/POM/PP/PVC, etc. Among them, it is worth noting that the PC material must be used with good compatibility with PC. Otherwise, the plastic PC material may break.
Dec. 03, 2020
Performance of optical damping grease
The optical damping grease must fix its own adhesion on the lubricating part so as not to exceed the range of the grease being squeezed out due to the rotation and stretching of the friction part.
Dec. 03, 2020
Damping grease is a very important special grease with special purpose
Damping grease Most mechanical and electronic mechanical equipment can control free movement in an economical way, achieve high quality, reduce noise, and fine-tune by hand.
Dec. 03, 2020
What kind of grease should be used between plastic and metal?
In the use of plastic parts, choosing the right plastic and metal grease can reduce friction and wear, reduce noise, and improve customer satisfaction.
Dec. 03, 2020
How does grease taste anti wear performance in gears
The lubricating oil film formed by the lubricating grease applied between the metal surfaces in contact with each other can bear the load from the axial and radial directions. The lubricating oil film has the characteristics of bearing the load, which is called the extreme pressure of the grease.
+86 769 2221 1256
+86 137 1192 0448
A402, New Base 360 Internet Industrial Park, Dongchen Middle Road, Dongchen, Dongguan City, Guangdong Prov., 523000
Copyright © Dongguan Baoxing lubricating oil Co., Ltd. All Rights Reserved | Sitemap
Technical Support: 
