Domestic substitution and production optimization are mainstream trends in auto parts manufacturing, yet installing suspension rubber bushings remains a tough pain point for OEMs, auto component factories and repair shops.
Core Standards for Qualified Assembly Lubricants
Auto bushings are mainly made of EPDM, natural rubber and PU, which are sensitive to mineral oil. Temporary assembly lubricants must meet three key requirements:
1. Instant friction reduction: Ease press-fit load and avoid tearing or bulging rubber bushings.
2. Full material compatibility: Mineral oil & aromatic-free; no rubber swelling or metal corrosion.
3. Fast-drying & low residue: Evaporate quickly without leftover film, won’t ruin painting/bonding or trap grit to reduce long-term abnormal noise.
Common greases, engine oil and silicone grease fail these standards: mineral oils permanently damage rubber, while silicone residues trap dust and trigger after-sales failures. Imported P80 also brings high costs and long lead times.
Baoxing BX-308-WY: Domestic Drop-In Replacement for US P80
With 20 years of specialty lubricant R&D, Baoxing launched BX-308-WY to solve rubber damage, after-sales risks and high import costs. Its performance matches P80 perfectly for auto assembly lines, component factories and repair shops.
1. Water-based emulsion for high yield rates Milky white lubricant forms smooth water film for easy press-fit of thin/thick-wall bushings. Viscosity ≥2mm²/s at 40°C prevents rubber deformation and rejects.
2. Safe for rubber & metal parts Mild weak alkaline formula (pH 8–9), no mineral oil/aromatics. Compatible with PU, EPDM and natural rubber, no swelling or cracking. Passes 100°C copper corrosion test, no rust on steel/aluminum brackets.
3. Dilutable & residue-free for cost control Mix with water at 1:1~1:3 for light bushings; use neat liquid for high-friction thick bushings. Fast evaporation leaves no stains, compatible with post-process painting and bonding.
4. Direct switch without production line adjustments Matching lubricity, evaporation speed and application methods (spray, soak, brush) as P80. Cuts costs by eliminating import tariffs and logistics fees.
5. Eco-friendly & worker-friendly Low-odor, low irritation to skin; RoHS & REACH certified with low VOCs, ideal for dust-free automated workshops and simple waste disposal.
Application Scenarios
· Auto OEMs: Automated press-fit of control arm, shock absorber and stabilizer bushings
· Auto component factories: Mass pre-assembly of rubber bushings, seals and O-rings
· Repair garages: Chassis bushing replacement
· General industry: Rubber dampers and molded sealing parts installation
Storage & Usage Tips
1. Store indoors, away from high temperature and direct sunlight.
2. Stir thoroughly before use for consistent lubrication.
3. Free samples available for on-site production verification.
Tags
Auto Bushing Assembly Lubricant, Rubber-Compatible Temporary Lubricant, P80 Replacement, Suspension Press-Fit Lubrication, Specialty Lubricant Solutions
